Polishing and sanding machines for rectangular parts
Here you can select the machines according to the part size and the square meter to be processed in 8 hours.
Machines
HBS 1600
The HBS 1600 polishing and sanding machine is the low-cost entry-level model for polishing and sanding lacquered furniture fronts and Corian® with part sizes up to 2800 x 800 x 50 mm. The machine is equipped with a simple sinusoidal fixed frequency conveyor belt oscillation and has an output up to 60 square meters in 8 hours.
HBS 1800
The polishing and sanding machine HBS 1800 is the optimal model for sanding and polishing lacquered furniture fronts and Corian® with a part size of up to 3000 x 800 x 50 mm (option 100 mm). The machine is equipped with a mechanical motorized frequency-controlled sinusoidal tool head oscillation and has an output of up to 80 square meters in 8 hours.
HBS 2200
The polishing and sanding machine HBS 2200 is the ideal machine for sanding and polishing lacquered furniture fronts and Corian® with part sizes up to 3500 x 1000 x 100 mm (option 200 mm). The machine is equipped with a mechanical motorized frequency-controlled sinusoidal tool head oscillation and has an output of up to 80 square meters in 8 hours.
Cross-sanding is available as a further option.
HBS 2600
The HBS 2600 polishing and sanding machine is the ideal machine for sanding and polishing lacquered furniture fronts and Corian® with part sizes up to 4000 x 1300 (option 1600) x 100 mm (option 200 mm). The machine is equipped with a mechanical motorized frequency-controlled sinusoidal tool head oscillation. The HBS 2600 can also be equipped with a second tool bridge and has an output of 80 to 150 square meters in 8 hours, depending on option.
Contour and cross-sanding are available as further options.
Optionen
Description of the different oscillation types
By sanding and polishing the surface with the sinusoidal oscillation, an even better high-gloss surface is created that meets the highest demands. Here you find a description of the different oscillation types.
Conveyer Belt Oscillation
The polishing and sanding machines can be equipped with a simple sinusoidal fixed frequency conveyor belt oscillation that moves in the forward direction of the conveyor belt. By these oscillating movements, the surface is evenly sanded or polished as if by hand. The machines with only conveyer belt oscillation have an output of up to 60 square meters in 8 hours.
Mechanical tool head oscillation
With the mechanical motorized frequency-controlled tool head oscillation, the tool head for sanding and polishing is additionally moved sinusoidally over a 20 mm long translation axis in the feed direction of the conveyor belt. The frequency can be set continuously via the graphic 7 "control terminal.
Since the tool head oscillation works independently of the conveyor belt, the belt can run at a higher machining speed than with belt oscillation. At the same time, the sanding or polishing result is improved again, so that the achieved quality meets the highest demands. The output of the machine increases compared to the belt oscillation from 60 square meters to up to 80 square meters in 8 hours.
Superimposed transport belt and tool head oscillation
For a few extremely high-quality applications, super imposement of conveyer belt and tool head oscillation can be advantageous. However, it must be taken into account that the output of the machine compared to pure tool head oscillation is again reduced to approx. 60 square meters in 8 hours.
More options
Vacuum table over the entire working width
The machines are equipped by default with a vacuum table, which gives more security against twisting when sanding and polishing small parts. The standard vacuum table with five rows of holes has a length of 220 mm, a width of 280 mm, is installed in the middle under the tool head and is designed for connection to the exhaust system.
The machines can optionally be equipped with a vacuum table over the entire working width. This option is especially recommended when several small parts placed next to each other or very thin parts <6 mm are to be machined.
This vacuum system is equipped with a side-channel compressor, which is a stronger alternative for connection of the vacuum table with the exhaust system.
Machine housing (Machinery Directive 2006/42 / EC)
As an option, the machines can be equipped with a machine housing.
- Attention! - Without the optional machine housing, the machines must be provided on site with a protective device ! Without machine housing or protective device, the machines do not comply with the Machinery Directive 2006/42 / EC. (No CE marking)