Roller Paternoster Rack System / Storage Paternoster Machine
The Gottschild Storage Paternoster machines FPS are the best technology for storing eg. foils for cutting plotter or vinyl rolls for your 3D furniture fronts production. You can store on the roller paternoster foils, paper, fabrics or whatever you need. The roller storage paternoster machine enables an efficient height optimized storage and saves floor space.
We manufacture the foil roller paternoster racks system to your specifications from 8 up to 200 rolls and for different roll widths from 1000 mm up to 5000 mm. On customer request, we also build foil roller paternoster in special sizes and designs in several rows. The paternoster racks system can be installed by yourselve.
- Roller width ( rw.) 1000 mm to 5000 mm
- Height up to 6000 mm, depth depending on the version
- Width 2350 mm to 5950 mm
- Other dimensions possible on customer request
- Roll diameter max Ø 600mm. If the roll diameter is smaller, more rolls can be stored.
- Maximum number of rolls 40 pcs. with Ø 250mm roll diameter for single row paternoster design. Multi-row paternoster with up to 200 rolls capacity on request.
- Support bars Ø: 60,5mm or 42,4mm
- Roll weight: max. 250 kg
- circulation speed 6m/min
- Dead man's control with UP/DOWN button function
- Main electrical connection/mains fuse depending on the design
- Nominal voltage 400 V / 50 Hz ( others on request )
- Side parts pre-assembled
- Side sheet metal cladding over the entire height
- Rear protective grille ( option )
- Prerequisite for installation is a load-bearing flat floor (no floating screed).
- Self-assembly easy to carry out
Advantages Gottschild Roller Paternoster Storage Machine
- Optimizes storage space
- Quick action
- Efficient handling
- Favorable work position for easy loading and unloading
- Do-it-yourself-assembly
- Switches for “Up“ and “Down“
- Measurings and cut the foils ( options )
Characteristics Standard Storage Paternoster Machine FPS 3000 to FPS 6000
Our single-row standard roller paternoster / foil paternoster are listed in the following example table. At the customer's request, we will of course build anything that is technically feasible.
FPS | constr. height BH ( m ) |
capacity number of support. bars Ø 300mm |
capacity number of support. bars Ø 600mm |
roller width ( rw.) mm dep. on design |
paternoster ( rw.)1,6m net weight ( kg ) |
paternoster ( rw.)1,6m total payload ( kg ) |
---|---|---|---|---|---|---|
2300 | 2,30 | 12 | - | 1000-3000 | 500 | 2000 |
2600 | 2,60 | 13 | - | 1000-3000 | 550 | 2500 |
2800 | 2,80 | 14 | 7 | 1400-5000 | 600 | 3000 |
3000 | 3,00 | 15 | 8 | 1400-5000 | 700 | 3000 |
4000 | 4,00 | 20 | 12 | 1400-5000 | 850 | 3400 |
6000 | 6,00 | 30 | 16 | 1400-5000 | 1000 | 5700 |
Example / Data: Foil Roller Paternoster Storage System FPS 3000
- Roller width of goods ( rw.) 1000 mm up to 5000m
- Height 3000 mm, depth 1300 mm
- Width from 2350 mm up to 5950 mm
- Deadweight 700 kg with roll width 1400 mm
- Capacity 8 rolls / max. Ø 600 mm up to 15 rolls / max. Ø 300 m
- Max. diameter of rolls 600mm. With lower roll diameter, can be correspondingly more roles to be stored.
- Diameter of supporting bars 60,5mm or 42,4mm
- Roll weight max. 250 kg
- Max. Total load: 3000 kg
- Velocity of circulation 6m/min
- Control system with key function UPWARD / DOWNWARD
- Electrical main connection/power system protection 16 A (at site)
- Nominal voltage 400 V / 50 Hz
- Lateral parts pre-mounted
- Lateral sheet metal covering across the whole construction height
- Safety guard on the back ( Option )
- Prerequisite for installation is a load-bearing flat floor (no floating screed).
- Easy self-assembly
- Loading meter = construction height + about 20cm /
height = 1m / depth = 1.4m
Options
Manual Cutting Bar with Ionizing for Foil Roller Paternoster FPS
The cutting bar for foil paternoster with counter and ionizing bar is the optimal system for precise cutting of foil strips and removal of electrostatic charge on foil storage paternosters.
Automatic Cutting Bar for Foil Roller Paternoster Storage System FPS
The cutting bar option for precise cutting of the folie webs can also be supplied in an automated version. Of course, this system can also be supplied with an ionizing bar to remove electrostatic charges. Please send us your request.